View Here : Penny Measure Tire Tread
Place a penny into several tread grooves across the tire. If part of Lincoln's head is always covered by the tread, you have more than 2/32" of tread depth remaining.
When performing the penny tire test, remember not only to check each tire, but to check various places around each tire. Pay special attention to areas that look the most worn. Even if parts of your tread are deeper than 2/32”, you should still replace the tire when any areas fail the penny test.
Penny test for tires – how to measure tread depth. You may have heard of the penny test for tire tread depth and wondered if it’s something a layperson can manage, and a reliable test and indication of tire tread depth.
The penny test is an easy and accurate way to measure tire tread depth. Take a penny and place it between the tire tread blocks with Lincoln’s head upside down and facing you. If Lincoln's head is buried, your tires still have more than 2/32" of tread.
In most states, legal tire tread depth is 2/32 of an inch, which is the exact distance from the tip of Abe’s head to the edge of the penny. Keep in mind that even if your tires pass the Lincoln penny test, you may want to consider buying new tires before the 2/32” rule kicks in. Tires with low treads make hydroplaning on rain-soaked roads more likely and significantly reduce traction in snow.
Heavily worn tread will prevent a tire from performing as designed and can lead to unsafe driving conditions. How to measure your tire tread depth with a penny. Place a penny between the tread ribs on your tire. A “rib” refers to the raised portion of tread that spans the circumference of your tire. Tire tread is composed of several ribs ...
Simply insert a penny into your tire's tread groove with Lincoln's head upside down and facing you. If you can see all of Lincoln's head, your tread depth is less than 2/32 inch and it's time to replace your tires.
How To Measure Tire Tread Depth. ... Penny Test For Tire Tread Wear Measurement. ... Another easy coin test to measure tread depth is the quarter test. Insert a quarter into your tread groove. If the tread touches Washington's head, you have at least 4/32 inch of tread remaining.
Place a penny head first into several tread grooves across the tire. If you always see the top of Lincoln’s head, your treads are shallow and worn. If this is the case, your tires need to be replaced.
Put a penny into the gap between tread blocks with Abe's head facing down. If you can see all of Lincoln's head, your tread depth is below 2/32” and the tire is legally bald. Replace immediately. If the president's head is covered at all, the tire is above 2/32”.